Directions for Use:

• Screw cap firmly onto Cantene.
• Place Cantene cap down in backpack or carrier. Bring tubing up and out of backpack or carrier.
• Attach black clip to clothing by flipping middle piece closed.
• Bite down on middle of bite valve and draw the contents up to drink. After a few uses, bite valve will become more comfortable to use.

Cleaning the Tubing Accessory:
Note how the parts fit together before taking this product apart.

• Remove cap from Cantene
• The bite valve can be cleaned by removing the blue silicone rubber piece from the black plastic piece, then removing the black plastic piece from the tubing.
• To clean the tubing around the cap and elbow joint, peel away the tubing and slide it off the elbow by moving your fingers from side to side (this will be difficult because of the friction fit of the tubing to the elbow). You may choose to trim the tubing and reattach.
• Clean with warm water and soap. A brush may also be used.
• Reverse above instructions to reassemble.

Back to Cleaning and Use.